How do I reset the oil maintenance light in my BWM 3 Series?

I recently changed the oil in my BWM 3 Series and now the oil maintenance light won't turn off. What do I need to do to reset the light?

To reset the oil maintenance light, follow these steps: 1. With the car turned off, hold down the trip odometer reset button. 2. Turn the car on (don't start the engine), keep holding the reset button. 3. After a few seconds, you will see 'Reset' in the display. Release the reset button and then immediately press and hold it again. 4.When you see 'Reset with 'OK?' next to it, release the button. 5. Press and hold the reset button once more until 'Reset' appears. 6. Release the reset button and then press and hold it for 3 seconds. 7. The oil maintenance light should be reset. If not, repeat these steps or consult your owner's manual.

Another method to reset the oil maintenance light is to remove the negative cable from the battery for 10-15 minutes and then reconnect it. This will reset the car's computer system and should turn off the light.

If the light still won't turn off after trying the previous methods, it is possible that there is an issue with the sensor or the oil itself. It is recommended to bring your car to a certified mechanic for further diagnostics.